Home › Forums › Tips & Techniques › ROLI control Kyma trought Logic X Tagged: Logic Roli Kyma This topic contains 1 reply, has 2 voices, and was last updated by SSC 2 years, 9 months ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts 11 December 2016 at 15:51 #1228 BjM Mario BajardiParticipant Hello, I need to control Kyma trought Logic x, with this type of routing: Roli Usb to MAc Kyma (Paca) midi 5 pin din out to RME midi input I would ask you if is it possible to SPLIT the usb Roli out to connect two devices: MAc and Kyma ( paca). So I will able to record all the MPE dat to Logic midi channel. 11 December 2016 at 18:38 #1229 SSCKeymaster Hello Mario, Have you tried using Kyma Connect (from Delora software)? With Kyma Connect you should be able to route Roli to Mac and then Mac to Kyma. Don’t connect the output of Logic to Kyma, just route the unchanged MIDI from Roli through Mac to Kyma. Please let us know how it goes! Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.