Change inputs for Tape Recorder

Question

Is there a way to change the inputs into the tape recorder?  My interface is an Impact Twin, and while I use inputs 1 & 2 for microphones, I use inputs 3 & 4 for everything else.  When I open up the tape recorder, the default inputs are 1 & 2, and try as I might I couldn't figure out how to change them to 3 & 4.  I'm stumped.

Answer 1

In the DSP Status window, click Configure and select Route Inputs

That opens a matrix that you can use to route the input channels of your audio interface to Kyma input channels.

Comments

Hmmm.  I tried that and wasn't successful.  The impact twin has six inputs.  In order for the tape recorder to see tracks 3&4, what tracks do I select in the Route inputs tab?  I believe I tried making inputs 3&4 the default inputs but that didn't work.  I spent some time trying a couple of different things in here, but still wasn't able to get tape recorder to see anything other than input 1&2.  Do I deselect inputs 1&2?  I don't think I tried that.

---

I would route the TC inputs 3 & 4 to Kyma inputs 1 & 2. My interface is a different model, but usually that would mean checking the first box in the 3rd row and the second box in the fourth row down.

---

Copy that.  Will do, thanks!

---

Got it working.  I think what was throwing me off was even after I changed the inputs in the route inputs matrix, when I would open the tape recorder the status window shows Audio Input: 1 2.  And I thought it was actually say input: 3 4.  It now makes sense to me cause I've routed device input 3&4 to kyma 1&2.   I've got it and now working great.

Answer 2

I have here an Impact Twin and what SSC is writing is the answer.

I have 2 pictures with 1: basic settings and 2: what should work for you.

Comments

Thanks Roland.  I thought I tried this config, but it's very possible I didn't have things set up exactly like this.  Will give it a go and let you know the results.

---

This did the trick.  Tape recorder now using inputs 3&4.  Thank you!