Behringer Firewire FCA 610 with a Pacarana and Kyma 7+ for Windows 10. After downloading & installing Kyma 7+ with all updates on Windows 10, Kyma 7+ reports:
No audio interface is selected. If you would like to select
an interface, go to the DSP menu and choose Status. (You
can still record to disk and view the waveform.)
This warning is only shown once.
What I have tried:
1. Run Kyma 7+, then power up the Pacarana, then power up the Behringer FCA 610. No go. SILENT AUDIO device only.
2. Shut down Kyma, shut down the Pacarana, shut down the FCA 610. Attach the FCA 610 to the Windows 10 computer by USB interface and update the firmware on the FCA 610 to the latest version, then fire up the Behringer control panel on Windows 10 and verify the FCA 610 is working and recognized. Exited the Behringer control panel, repeated step 1 above, no go. "No audio interface" SILENT AUDIO device only.
3. Shut down Kyma, the Pacarana, then the FCA 610. Tried a different firewire 800 cable. Repeated step 1 above. No go. "No audio interface" SILENT AUDIO device only.
The blue FIREWIRE/USB led on the front panel of the Behringer FCA 610 is lit. So it appears to recognize the firewire 800 interface is connected to the Pacarana. But the Pacarana/Kyma 7+ doesn't seem to see it.
At this point, I'm out of ideas.